This tower kit is designed specifically for the Primus Windpower “AIR” 30 and 40 wind turbines. Two level structure, anchored with guy wire allows the use of lightweight tubing while providing plenty or resistance. The AIR tower kit includes a simple yet effective elbow/tee for its base. Combined with a short length of tubing this type of base eliminates the need for a concrete pad, base plate and a swivel for the base of the tower.
Anchors and pipe or tubing are not furnished with the kit so you have the flexibility to use the most appropriate components for the installation. This kit includes galvanized steel cable, not stainless steel cable. Fast Installation It comes with a Gin Pole kit to help errect the wind turbine (Set Up Kit) ; Gin Pole kit does not include any tubing for the Gin Pole Mast; You can buy together with turbine mast tubing from metal store Tower mast must be 1.5 in. schedule 40 steel tubing No Winching required No Cement Base if not needed
Kit includes:
Tower Base 1
Upper Wire set 1
Lower Wire Set 1
Tower Base Staples 23/8” x 1 ½”
Bolts 3-3/8”
Lock-nuts 3
Cable Thimbles 8
Cable Clamps 16
Items Not Included In This Kit:
Anchors (The type of anchors used will depend on the ground makeup at your tower site. This is explained further in the “Anchors” section of this manual.) Tubing for Tower and Gin Pole Ground Rod and Clamp Lightning Arrestor (optional) Junction Box and Adapter (optional) Flex Conduit and Fitting (optional) Electrical Wire Wire Connectors (preferably copper split bolts) Pipe Insulation (to prevent wire “rattle” inside pole) (optional) Electrical tape
Tower Setup Kit Parts List: Gin Pole Cap 1 100’ Rope 1 Snap Links – Work Load Rated to 400# 3 8-foot Cable 1 3/8” x 1 ½” Bolt 1 3/8” Lock-nut 1
Mast Selection:
For pipe tube specifications please consider the wind speed resistance as the main mitigation factor in a relation tower height ( 45 Ft.) tube thickness and max win speed the tower will stand with no major impact on it. .065 inch (1.65 mm) can stand up to 70mph for a 45 Ft. tower .090 inch (2.3 mm) can stand up to 80mph for a 27 Ft. tower; Schedule 20 .140 inch (3.6 mm) can stand up to 900mph for a 27 Ft. tower;Schedule 40
Air Wind Turbine Sitting and Positioning
The AIR wind turbine is designed to mount on tubing or pipe with a nominal 1.875 – 1.900 inch outside diameter. This dimension enables constructing a tower from a range of readily available materials including 1 1/2 inch Schedule 40 steel pipe and 2 inch SS-20 galvanized fence tubing (0.090 inch wall thickness). Under no circumstances should plastic pipe be used to construct a tower. The manufacturer has few tower designed in different range as 27 ft (8.3 m) Tower, 29 ft (8.8 m) Tower and 45 ft (13.7 m) Tower
The minimum recommended tower height is 25 ft (7.6 m) on open ground or 20 ft (6 m) above nearby obstructions. Try to locate the wind turbine in the “cleanest” turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.
RETURN POLICY
We gladly accept most unused and unopened merchandise for a full refund within 30 days of purchase (see exceptions below). Simply return the complete product to us in its clean original packaging, accompanied with the original proof of purchase or receipt. Note that the buyer is responsible for return shipping costs.
Unused items with open boxes within 30 days of purchase will be subject to a 10% restocking fee. These items must be returned in the original packaging with all accessories.
Please note:
Special-order merchandise is not returnable. Non-refundable items also include: Used toilets, cleaning or clothing products, hammocks, Coghlans, Aquatabs, and other items as specified Batteries of any kind are not returnable. This includes but is not limited to all flooded acid, sealed/AGM, or LiFePO4 batteries. There are no exceptions*
*It is not possible to measure or guarantee with certainty that a battery has been unused once it has left our warehouse. Accepting a battery return and then reselling to other customers with the presumption of it being unused is not a practice we follow.
WARRANTY
All merchandise is subject to the manufactures warranty and will be repaired or replaced as per the manufactures directions. The Cabin Depot™ is a retail business and we do not employ installers. However, we are very happy to assist customers having issues with any products purchased by reaching out to the manufacturer on the customers behalf if needed to help expedite the troubleshooting or warranty process.
DISCLAIMER
The Cabin Depot Ltd. is a retail business exclusively and accepts no liability for DIY installations or equipment selection. It is the customers responsibility to read the manufacturers manuals and installation instructions carefully, ensure all local, provincial, or national building codes are met, and contact a qualified installer or tradesperson if required.
Shipping Policy
The Cabin Depot™ is pleased to offer free shipping on select items, and adheres to the following policy:
Free shipping applies to standard residential or business addresses only. Remote locations are excluded, see below for examples.
Smaller parcel orders will ship by USPS, FedEx, UPS, or similar.
Larger palletized orders such as wood stoves, appliances, batteries, Cinderella incineration toilets, and solar panels will ship by reputable 3rd party trucking companies with residential liftgate and appointment services included.
Tracking information will be uploaded to our website as soon as it becomes available, at which time customers will receive a notification and can track their order progress. Note that some gmail or hotmail users may have our confirmations misidentified as spam, so we suggest checking your junk folder before contacting us.
The Cabin Depot™ uses 3rd party carriers and trucking companies, therefore cannot guarantee exact delivery dates under any circumstances. Customers with specific delivery date requirements should contact our shipping department who can review available options.
Our shipments leave our dock in perfect condition. The carrier or trucking company is fully responsible to deliver orders damage-free and are fully responsible for any delayed or lost shipments.
Due to increasing fuel and operating costs, trucking companies are now charging additional fees to deliver to some locations in the USA which unfortunately may not be covered under our free shipping policy. The Cabin Depot™ reserves the right to notify the customer of any additional shipping or handling charges if necessary to deliver to the address provided. If notified of any additional charges, the customer has the right to modify or cancel the order for a full refund.
DELIVERY TO REMOTE LOCATIONS
Our shipping team have managed deliveries to some of the most remote locations in North America. If you live in a remote location, we encourage you to contact us before placing your order so we can review delivery options with you in advance of your purchase.
For any questions regarding this shipping policy or quotes please contact us:
Our resource center can help educate, inform, and guide you in a natural way through the website’s product selection and toward the goals and end results that you may. Click here!
